ตู้ไปรษณีย์แจ้งเตือนทาง Line สอนทำแบบระเอียดยิ๊บ..
---------------------
จากเมื่อสัปดาห์ที่แล้วผมได้โพสต์วีดีโอทดสอบการทำงานของตู้ไปรษณีย์แจ้งเตือนทางไลน์ไป ก็มีหลายๆคนสนใจผมจึงได้ทำคลิปขึ้นมา เพื่อพาทุกคนทำ ผมวังว่าคลิปนี้จะมีประโยชน์สำหรับใครหลายคนนะครับผม😊
-------------------------------------------------
คลิป https://www.youtube.com/watch?v=_cVsQ1oRuRA&t=108s
--------------------------------------------------
โค้ด
void Line_Notify1(String message1) ;
#include <ESP8266WiFi.h>
#include <DHT.h>
#define WIFI_SSID "ชื่อ wifi" /////////////*************แก้
#define WIFI_PASSWORD "รหัส wifi"////////**************แก้
#define LINE_TOKEN_PIR "line token"////***************แก้
#define PirPin D6
#define DHTPIN D7
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
String message1 = "ข้อความแจ้งเตือน";//****************แก้
bool beep_state = false;
bool send_state = false;
uint32_t ts, ts1, ts2;
void setup() {
Serial.begin(115200);
Serial.println();
pinMode(PirPin, INPUT);
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, HIGH);
dht.begin();
Serial.println("connecting");
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
Serial.print("connecting");
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
delay(500);
}
Serial.println();
Serial.print("connected: ");
Serial.println(WiFi.localIP());
delay(10000);
Serial.println("Pir Ready!!");
read_sensor();
ts = ts1 = ts2 = millis();
}
void loop() {
ts = millis();
if (WiFi.status() == WL_CONNECTED) {
digitalWrite(LED_BUILTIN, LOW);
} else {
digitalWrite(LED_BUILTIN, HIGH);
}
if ((ts - ts2 >= 60000) && (WiFi.status() == WL_CONNECTED)) {
read_sensor();
}
if ((ts - ts1 >= 5000) && (beep_state == true)) {
beep_state = false;
}
if ((digitalRead(PirPin) == HIGH) && (beep_state == false) && (WiFi.status() == WL_CONNECTED)) {
while (digitalRead(PirPin) == HIGH) delay(100);
Serial.println("Detect !");
Line_Notify1(message1);
beep_state = true;
}
delay(10);
}
void Line_Notify1(String message) {
WiFiClientSecure client;
if (!client.connect("notify-api.line.me", 443)) {
Serial.println("connection failed");
delay(2000);
return;
}
String req = "";
req += "POST /api/notify HTTP/1.1\r\n";
req += "Host: notify-api.line.me\r\n";
req += "Authorization: Bearer " + String(LINE_TOKEN_PIR) + "\r\n";
req += "Cache-Control: no-cache\r\n";
req += "User-Agent: ESP8266\r\n";
req += "Content-Type: application/x-www-form-urlencoded\r\n";
req += "Content-Length: " + String(String("message=" + message1).length()) + "\r\n";
req += "\r\n";
req += "message=" + message1;
// Serial.println(req);
client.print(req);
delay(20);
while (client.connected()) {
String line = client.readStringUntil('\n');
if (line == "\r") {
break;
}
}
}
void read_sensor() {
float h = dht.readHumidity();
float t = dht.readTemperature();
if (isnan(h) || isnan(t)) {
Serial.println("Failed to read from DHT sensor!");
return;
}
Serial.print("Temperature: ");
Serial.print(t);
Serial.println(" *C ");
}
----------------------------------------------------------
authorization: bearer token 在 How to interact with the APIs using the new authentication type 的推薦與評價
In the “Auth” dropdown menu, select “Bearer Token”. Selecting an authentication type. Type in your access token in the “TOKEN” field, and type the word ... ... <看更多>