Federal Stance XL Rim
🎱🎱🔥🔥
@djbmxworkshop @federalbikes
The Federal Stance XL rim has a wider (40mm) cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% to reduce the possibility of spokes pulling through the rim.
We have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres.
Spec:
New contemporary design using triple box section
Wider profile rim (40mm)
Lower profile shape (15mm)
Aluminium 6066 material
Increased wall thickness around spoke holes
Wider spoke layout makes it easier to build the rim and tighten the spokes
Includes new 35mm wide XL rim tape
Available in Matt Black, Clear Gold and Polished Silver
Width 40mm
Height 15mm
ERD 394mm
Material 6066-T6 Aluminium
Weight 18.5oz
Colour: Anodised Black
DJ BMX Workshop
Address: G/F, 24 Tak Cheong Street, Yau Ma Tei, Kowloon, Hong Kong (852-35792920)
地址: 香港九龍油麻地德昌街24號地下 (油麻地地鐵站B-2出口直行到天橋轉右)
Facebook: DJ BMX Workshop Hong Kong
Instagram: @djbmxworkshop
#bmx #hongkongbmx #djbmx #Xgame #hkbmx #freestylebmx #streetbmx #federalbmx
anodised aluminium 在 Anodizing - Wikipedia 的相關結果
In typical commercial aluminium anodizing processes, the aluminium oxide is grown down into the surface and out from the surface by equal ... ... <看更多>